Garage Door Panel Replacement in Toronto

It should. Insulated sections come in different thicknesses and core types, and the replacement needs to match yours so the joints line up, the hinges sit at the right depth and the weight stays consistent with the springs. Mixing an insulated section into an uninsulated door, or the reverse, generally means a step at the joint and a change in balance. The technician reads the thickness and core type from the door before ordering.

It happens with older doors, since embossing patterns, joint profiles and colours change over the years. The technician looks for the nearest current section from the same manufacturer and describes how it would differ in look and fit. Sometimes the difference is minor and acceptable; sometimes the joint no longer mates. In that case the options are a section from a compatible series, or replacing the door as a whole, and both are explained before anything is ordered.

The manufacturer's label is the starting point. It is often a sticker on the end of a section, on the inside of the top section or on the vertical track, and it usually gives the model or series, a date and sometimes a colour code. Failing that, the panel design, section heights, thickness, joint profile and hinge spacing narrow it down, and the distributor can usually confirm the model from photographs and measurements.